carbonetix

How we have kept our energy use 75% lower than a typical office of our size

This week marks exactly one year since we first moved into our current office of 267 m2. Readings of our electricity meter show energy consumption was 30.2 kWh/m2 for the year. Thats all our energy use - we don’t have a gas connection - and includes heating and cooling of the office. To put this in context, this is lower than any of Australia’s famous green buildings. How have we achieved this?

CarbonetiX office

First, we operate the heating/cooling system manually, and only when needed. Most of the year its off. We get good ventilation through the building by opening the front and back doors. HVAC control

Second, we have delamped - that is removed one lamp from each double fluorescent light fitting, and fitted Mirrorlux reflectors behind the remaining fluoro tube. delamped fluorescent light fitting

Third, we have a good switch off culture. The printer goes off at night. Staff only switch lights on when needed. Computers are unplugged at night time.
printer signage

Fourth, we use laptops, which use less than half the power of desktop computers.
laptop

Fifth, we use occupancy sensors to control lighting. If a workspace is empty, the light goes off.

occupancy sensor

Sixth, our internal phone and internet network equipment goes off overnight, using a simple plug in timer. We use VoIP phones with power over network, power over network was chosen deliberately to enable this out of hours shut down.
timer on phone and internal network

Seventh, our servers go off automatically each night after the backup, and are turned on manually the next day.
servers switched on manually

Eighth, in the one office with windows the lights stay off most the time.
daylit office

Ninth- we use a kettle rather than a boiling hot water unit. The boiling hot water unit in the photo has been disconnected.
boiling hot water unit replaced with kettle

Tenth- we have removed the tubes in the outside light of our sign. We don’t operate at night, and there is no need to have it illuminated.
sign with power disconnected

In December last year we installed skylights. As they have only just been installed they wouldn’t have contributed much to our savings last year. But in 2009 they should help keep our energy consumption even lower.
skylight

There isn’t a lot of rocket science in what we have done. The biggest savings have come from how we operate the heating and cooling - and we haven’t spent a cent on control systems. Energy conservation is good for the environment, and has saved us money. Assuming the previous tenant used 130 kWh/m2/year (pretty typical for an office this size) last year we saved $4,000 and 35 tonnes of greenhouse gas.

The average double fluorescent light fitting (probably like the one above your head right now) uses $800 of electricity over its life time.

Wouldn't you like to HALVE this cost? AND do something to slow climate change...

Delamping your fluorescent fittings is a simple, reliable, low-cost way of slashing your lighting energy costs - and greenhouse gas pollution. Click here to get your free report on how to delamp.

Tags: ,

3 Responses to “How we have kept our energy use 75% lower than a typical office of our size”

  1. Machine Binding Says:

    Great stuff. Nice to read some well written posts. A long way between them.

  2. Anna Johnson Says:

    Excellent - this shows how ANY business can take practical steps to reduce energy consumption.

  3. Zero net carbon office buildings affordable by 2020 » Blog Archive » What will make zero net energy office buildings affordable by 2020? Says:

    [...] only half the roof needs to covered with solar panels, or allowing for some shading. For example our office uses only 30 kWh/m2/year, but is shaded in winter, we could make it energy neutral now just by covering around 2/3rds of [...]

Leave a Reply